Veiksmes stāsti

VISI Helps Mouldmaker Rise To New Challenges 28.01.2020 VISI Helps Mouldmaker Rise To New Challenges
Having revamped their corporate image and website in the last few weeks, an injection mould manufacturer welcomes new challenges, and is pushing ahead with important medical, aerospace and automotive contracts.

EDGECAM Powers Tridan’s 5-Axis Machining 30.10.2019 EDGECAM Powers Tridan’s 5-Axis Machining
With customers in the aerospace, motorsport and medical sector demanding faster turnaround times and tighter tolerances, sub contractor Tridan Engineering says 5-axis work, programmed by EDGECAM, has become a major part of their manufacturing process.

Writing The Future With RADAN and WORKPLAN 07.08.2019 Writing The Future With RADAN and WORKPLAN
A contract to supply metal bread baskets for the Eiffel Tower’s restaurant was the catalyst for a laser cutting company to invest in RADAN sheetmetal CAD/CAM software.

VISI Gives Flexibility For Tiny and Large Mold Components 15.07.2019 VISI Gives Flexibility For Tiny and Large Mold Components
A hot runner and injector specialist for the mold and die industry uses a range of VISI CAD/CAM software to optimize their workflow, saying it’s the most suitable solution for their working requirements.

Greater efficiency and accuracy of Glen Dimplex Thermal Solutions with RADAN 28.06.2019 Greater efficiency and accuracy of Glen Dimplex Thermal Solutions with RADAN
Cooling systems specialist Glen Dimplex Thermal Solutions (GDTS) maintains its reputation for quality by consistently upgrading production technologies while remaining dedicated to customer service.

A RADAN nest in 10 seconds for Alcon Tool 13.06.2019 A RADAN nest in 10 seconds for Alcon Tool
Alcon Tool stays ahead of the game by implementing new technologies to increase efficiency and material yield. RADAN helps this industrial cutting tool manufacturer to increase material yield by a minimum of 10 percent per sheet.

RADAN for laser and bending of a truck manufacturer 27.05.2019 RADAN for laser and bending of a truck manufacturer
Beach Manufacturing Company, Inc., harnesses the power of RADAN automation and nesting tools and Radbend’s job-planning functions for continued success

WORKNC & WORKPLAN – The Partners In Dixence’s Software/Machine Tandem 02.05.2019 WORKNC & WORKPLAN – The Partners In Dixence’s Software/Machine Tandem
A company specialising in industrial rubber injection moulds and cold runner blocks for the automotive sector uses WORKNC to create 3+2 axis toolpath programs and WORKPLAN to consolidate a variety of information from sales orders to invoices.

Small, Complex Medical Parts get the VISI Treatment 18.04.2019 Small, Complex Medical Parts get the VISI Treatment
A mold maker producing tools for thermoplastic materials and die-castings relies on the specialist VISI Analysis module to discover critical areas at an early stage of the design process, which greatly simplifies their work.

Radan Nesting and MRP make a difference for Tindle Construction, Inc. 10.04.2019 Radan Nesting and MRP make a difference for Tindle Construction, Inc.
Continuous improvement has always been the goal at Tindle Construction, Inc., or TCI, where industry expertize and the implementation of efficiency-boosting technologies has helped the company create high-quality products since 1994.

SURFCAM TRADITIONAL strategies serve Blaze Precision well 03.04.2019 SURFCAM TRADITIONAL strategies serve Blaze Precision well
Blaze Precision, Inc., uses the specialized machining strategies of SURFCAM TRADITIONAL to produce a variety of complex parts.

RayBar Machine Company produces complex parts with EDGECAM 27.03.2019 RayBar Machine Company produces complex parts with EDGECAM
The crew at the RayBar Machine Company knows that no job is too difficult when you have the right tools, which is one reason that the business has remained competitive without sacrificing quality for the past 41 years.

RADAN Trials Improve Efficiency for Lasershape 21.03.2019 RADAN Trials Improve Efficiency for Lasershape
A sheet metal subcontractor has recently switched over to RADAN to drive its fleet of four laser cutters and two water jets, after an intensive three months of development, trials, tests and training.

EDGECAM Waveform “Massive” for I & G Engineering 04.03.2019 EDGECAM Waveform “Massive” for I & G Engineering
An engineering subcontractor recently moved all its CAM programming across to EDGECAM after Seco Tooling provided them with support solutions to specific issues on complex components.

Dramatic time percentage savings with Radan 13.02.2019 Dramatic time percentage savings with Radan
Monti, Inc., tier-one supplier for the electrical industry, cut programming time by 60 percent, nesting time by 80 percent, and laser-cutting time by 30 percent with RADAN.

New customers and orders for Logan Machine Company — only with EDGECAM 07.02.2019 New customers and orders for Logan Machine Company — only with EDGECAM
Sixty-year-old job shop Logan Machine Company is a turn-key systems specialist that has expanded capabilities and gained competitiveness with EDGECAM. Succeeding as a job shop requires a combination of diverse machining capabilities and a willingness to take on new challenges, which is exactly how turn-key manufacturer Logan Machine Company has beaten the competition for 60 years.

The Highest Technical Solution For QDM Specialist, Polyhitech 31.01.2019 The Highest Technical Solution For QDM Specialist, Polyhitech
A Quick Delivery Mold (QDM) specialist says Draft Analysis is an important time saver for their business, and has played a major contribution towards meeting customers’ increasingly faster turnaround demands.

WORKNC Automates Mould Maker’s Weekend Production 21.01.2019 WORKNC Automates Mould Maker’s Weekend Production
A mould maker serving the automotive industry says WORKNC software gives them a distinct advantage, setting them apart from their competitors with superior lead-times, quality and expertise.  

DJM Engineering Provides Emergency Repair Service With Edgecam 08.01.2019 DJM Engineering Provides Emergency Repair Service With Edgecam
DJM Engineering (Banbury) Ltd uses Edgecam for quick, emergency 2D design and machining to repair customers’ damaged or broken parts and get them back in action within hours.

Non-Parametric Design From VISI Benefits Brandauer’s 150-Billion Annual Products 13.12.2018 Non-Parametric Design From VISI Benefits Brandauer’s 150-Billion Annual Products
VISI mould and die software overcomes design issues for a 156-year-old precision stamping company, enabling them to ship around 150-billion individual products a year.

Batch Bending With Radan Saves Spooner A Week’s Work – Every Week 21.11.2018 Batch Bending With Radan Saves Spooner A Week’s Work – Every Week
A specially-written computer program which can import dozens of components into a press brake bending system at once, is saving a sheet metal manufacturer a full week’s work, every week.

High temperature plastics for Airbus 05.11.2018 High temperature plastics for Airbus
The aerospace industry makes high demands on its suppliers and DEVA-Kunststoff-Technik GmbH is a proven partner in this sector. Using the CAD/CAM solution by Vero Software, they produce hundreds of different injection-moulded parts for all civil Airbus models as well as for the military transport plane A400M and the Eurofighter.

Edgecam Wins Business for STDU, Increasing Turnover by 12.5% 15.10.2018 Edgecam Wins Business for STDU, Increasing Turnover by 12.5%
STDU company from France, manufacturer of parts for agriculture, medicine and aerospace industries, was able to increase its turnover for 12.5% and significantly increased part machining speed after investing in CAD/CAM Edgecam software for milling, turning, multi-axis and mill turn metal machining.

Mould Tooling Time Cut By Half And Machining Code Ready In Moments 27.08.2018 Mould Tooling Time Cut By Half And Machining Code Ready In Moments
A british mouldmaker and plastic parts manufacturer Sharnold could shorten its mould design and plate cutting time in half, generally improving its order fulfillment time by one third. It was made possible by creating NC code in WorkNC CAM suite and recently acquired specific CAD/CAM/CAE software VISI for mould design and development.

Radan Fixes Best Deal For Bosch, From Suppliers 06.08.2018 Radan Fixes Best Deal For Bosch, From Suppliers
One of the world’s leading IoT companies uses Radan software in a pilot project to ensure it gets the best deal from suppliers who produce its sheetmetal components.

Edgecam Halves Hewland Fork Cycle Time, and Slashes Tooling Costs 09.07.2018 Edgecam Halves Hewland Fork Cycle Time, and Slashes Tooling Costs
A market-leader in gearbox and transmission systems for the motor sport industry is branching out into electric vehicle transmissions, and says the company has benefitted with a new manager driving their Edgecam software use up a gear.

Radan Success Opens Door For Edgecam and Hexagon Measuring Arm 01.06.2018 Radan Success Opens Door For Edgecam and Hexagon Measuring Arm
A closed digital loop involving Radan and Edgecam, from Vero Software, ensures that special solution machines for the automotive and textile industries meet ISO 9001 certification.

Radbend 6 months on 08.05.2018 Radbend 6 months on
6 months ago British sheet metal subcontractor Secal implemented Radan's bending module Radbend. We have already published a case study about this decision and expectations, so now we are back with another story from Secal's representative Annabel Smith, who summarized how the engineering department is finding finding Radbend so far and what they plan to do next.

Edgecam Programs Merged Into Single Machining Files With 1.5-Million Lines Of Code 16.04.2018 Edgecam Programs Merged Into Single Machining Files With 1.5-Million Lines Of Code
Mould maker Kavia Tooling have developed their own machining strategies to run multiple CNC programs at once by merging several of them into a single file… many containing around 1.5-million lines of code.

Introduction of Radan Software to Secal Ltd 05.03.2018 Introduction of Radan Software to Secal Ltd
At Secal, a sheet metal subcontracting company from Britain, we are future-proofing against the industry-wide recruitment crisis that is leading to a lack of available skilled engineers. It is not a secret that within the manufacturing industry we are entering a shortage of skilled workers.

5-Axis Pioneers Thrive With VISI 20.02.2018 5-Axis Pioneers Thrive With VISI
One of the early adopters to introduce simultaneous 5-axis machining into its region, chose the VISI integrated CAD/CAM system from Vero Software, to drive its CNC machine tools.

Unraveling The Mysteries Of The Universe With WorkNC 15.01.2018 Unraveling The Mysteries Of The Universe With WorkNC
Mechanical components produced with WorkNC are used by a research organization in Switzerland to study the structure of the universe. The research body is the CERN, the European Organization for Particle Physics, located in Geneva since 1954.

Radan Macro Adds Shine To Commercial Kitchen Specialists 19.12.2017 Radan Macro Adds Shine To Commercial Kitchen Specialists
A bespoke Radan macro, written specially for a commercial kitchen manufacturer, has overcome a major design issue by completely revolutionizing their project nesting.

Streamlined processes and top-notch customer service with Radan 17.11.2017 Streamlined processes and top-notch customer service with Radan
Quality Fabricated Solutions (QFS) streamlines processes and delivers top-notch customer service with Radan CAD/CAM software solutions for sheet metal fabrication. At Quality Fabricated Solutions (QFS), the overarching mission is to always deliver on company promises, from producing parts on time to responding quickly when changes arise.

Waveform Roughing Moves Gibbs Up a Gear 24.10.2017 Waveform Roughing Moves Gibbs Up a Gear
One of the UK’s leading gear technology specialists saved an “astonishing” 45 hours – a complete week’s milling production time – on a batch of 30 gears manufactured in hardened tool steel using Edgecam’s Waveform Roughing Strategy.

Gaining New Ground 06.10.2017 Gaining New Ground
Job shop A&B Machine and Design uses Edgecam to fulfill a wide range of customer demands, and to diversify its capabilities.

Manufacturing with a Progressive Edge 18.09.2017 Manufacturing with a Progressive Edge
VISI assists Atlantic Tool & Die with the design of complex progressive dies for the automotive industry.

Breaking New Ground 24.08.2017 Breaking New Ground
Action Manufacturing uses Radan and Radbend CAD/CAM software for sheet metal fabrication to manufacture its custom line of Action Trackchairs.

One-of-a-Kind Sheet-Metal Creations 10.08.2017 One-of-a-Kind Sheet-Metal Creations
Custom street and off-road vehicle specialist Jay Fab/Plan B Fabrication manufactures one-of-a-kind sheet-metal products with Radan

Edgecam Slashes Lathe Roughing Cycles From 24 Minutes To Just 8 28.07.2017 Edgecam Slashes Lathe Roughing Cycles From 24 Minutes To Just 8
Machining trials carried out by Seco Tools using Edgecam’s new waveform turning roughing strategy, slashed a Welsh subcontractor’s roughing cycle for a diesel generator fan spacer by two-thirds, prompting them to invest in the CAD/CAM software.

Radan Means Ups, And No Downs, For Lift Component Manufacturing 12.07.2017 Radan Means Ups, And No Downs, For Lift Component Manufacturing
Radan CAD/CAM software ensures the design and production process of a lift component manufacturer only has ups…and no downs.

Pawle & Company Ltd began using Radan at around the turn of the century, and it played a key role in doubling turnover to £1.25m after current owners Ray Ashby and his wife Joelle took over the company in 2011.

Edgecam’s Waveform “The Only Way To Successfully Cut For Certain Complex Aerospace Applications” 08.06.2017 Edgecam’s Waveform “The Only Way To Successfully Cut For Certain Complex Aerospace Applications”
A cutting tool developer partners with Edgecam software to ensure its philosophy of taking customers’ machining challenges off their hands, is always successful.

Greenfield Shows Radan Power to Tomorrow’s Engineers 02.06.2017 Greenfield Shows Radan Power to Tomorrow’s Engineers
Specialist CAD/CAM and logistics software from Radan is helping the largest sheet metal subcontractor in the South West of England to compete effectively with manufacturers in Eastern Europe and the Far East.

Radan Intelligent Nesting “Vital” For Norlec 28.03.2017 Radan Intelligent Nesting “Vital” For Norlec
One of the UK’s largest sheet metal subcontractors says the Project Nesting function in the world’s most powerful sheet metal CAD/CAM software, Radan, is essential for keeping the company competitive.

Four Vero Solutions Optimize Georges Pernoud IT System For Industry 4.0 24.02.2017 Four Vero Solutions Optimize Georges Pernoud IT System For Industry 4.0
Preparing for Industry 4.0 was so important to an injection mold manufacturer that they tasked CAD/CAM provider Vero Software with optimizing their I.T. system to cut the time taken on non-value-added CAD tasks by 35 per cent.

Radan “A Springboard” For 5-Axis Laser Pioneers’ Development Plans 24.01.2017 Radan “A Springboard” For 5-Axis Laser Pioneers’ Development Plans
The only sheet metal subcontractor in the Irish Republic to offer 5-axis laser cutting, is using Radan’s specialist Radm-ax module as a springboard to becoming more design-focused. ELC Laser Group was the first company to introduce laser cutting into the Irish market in 1989, and Operations Manager David Power says as industry leaders, they continue to develop the latest technology, providing customers with what he calls the “definitive choice in laser cutting solutions.”

Radan Nests And Bending “Vital” For KMF 20.01.2017 Radan Nests And Bending “Vital” For KMF
Manufacturing components for such diverse products as premium class aircraft seating, coffee vending machines and electrical distribution boards, the UK’s largest sheetmetal subcontractor says specialist CAM software is vital to nest a range of parts for several customers on the same sheet.

Radbend Begins And Ends Radan Returner’s Process 21.12.2016 Radbend Begins And Ends Radan Returner’s Process
Laser cutting on a fully automated Bystronic Fiber 3kw machine driven by Radan, now takes precedence over punching, for a leading manufacturer of sheet metal welfare units for construction site and road workers.

Radan The Catalyst For In-House Sheetmetal Work 24.11.2016 Radan The Catalyst For In-House Sheetmetal Work
Radan, the world’s most powerful sheetmetal CAD CAM software, played a major role in developing new products featured in an ergonomics and power industry manufacturer’s 30th anniversary catalogue this year.

Cell Partnership Increases Horstman Capacity – Mazak, Edgecam  & Iscar 24.10.2016 Cell Partnership Increases Horstman Capacity – Mazak, Edgecam & Iscar
A partnership between Mazak, Edgecam and Iscar has created a £1.25m manufacturing cell giving a leading defence systems manufacturer additional capacity to produce complex 5-axis components on a sub-contract basis.

Radan Keeps Underground Rolling 26.09.2016 Radan Keeps Underground Rolling
Almost everyone who has been on a London Underground train will have seen products drawn up and manufactured in Radan by sheetmetal subcontractor Sweetnam & Bradley Ltd.
Having had framework agreements in place with London Underground for around 20 years, Sweetnam & Bradley Ltd are heavily involved in refurbishing carriages, with anything from door skins and window frames, through advert and map panels, to sturdy cover flaps for alarm levers.

VISI = Medals & Titles for Skeleton Racers 24.08.2016 VISI = Medals & Titles for Skeleton Racers
Britain’s number one skeleton racer for the last 20 years says the VISI CAD/CAM applications are vital in keeping the sport’s leading athletes at the top of their game.

From Start to Finish 25.07.2016 From Start to Finish
Shaving minutes and increasing quality is the goal of every manufacturing business, which is why having the right tools for the job can be the only way to get a fledgling business off the ground. Such is the case with Sterling Technologies, Inc., a Morrisville, Vermont-based job shop that serves a handful of industries, including energy and medical, and turns out parts that are “smaller than a breadbox.”

WorkNC CAD/CAM enables shop floor 5-axis programming at Jaguar Land Rover 23.05.2016 WorkNC CAD/CAM enables shop floor 5-axis programming at Jaguar Land Rover
Jaguar Land Rover produces a large number of prototype vehicles each year, and uses WorkNC CAD CAM software in its CNC model making workshop and toolroom. As well as manufacturing prototypes using CNC equipment, Jaguar Land Rover has extensive rapid prototyping facilities with 12 machines for additive manufacture, and anticipates that it will produce approximately 50,000 parts, using these techniques alone, over the next 12 months.

Edgecam's 5-Axis Toolpaths Wax Lyrical for Tooltech 18.04.2016 Edgecam's 5-Axis Toolpaths Wax Lyrical for Tooltech
A wax injection and mould tool manufacturer has recently invested in 5-axis technology to dramatically reduce production time.

Eliminating Double Duty 24.03.2016 Eliminating Double Duty
Innovent Air Handling Equipment and Valent Air Management Systems produce custom and configurable systems with help from Radan.

VISI - The Most Convincing Solution 24.02.2016 VISI - The Most Convincing Solution
A long-established Bavarian toolmaker says two things are essential for its success: it reinvents itself regularly, and industry focused technology such as VISI software for sheet metal tool design and programming 4 and 5-axis CNC machines.

Radan Lights The Way For V & F’s Multi-Bend Tooling 18.01.2016 Radan Lights The Way For V & F’s Multi-Bend Tooling
Radan, the powerful CAD/CAM software for sheet metal applications, is lighting the way for an engineering subcontractor to carry out small bends as part of the cutting process on their punch press.

Aravis Achieve Accurate Quoting And Precision Parts With WorkNC 09.06.2015 Aravis Achieve Accurate Quoting And Precision Parts With WorkNC
WorkNC CAD/CAM ensures a precision subcontractor provides both accurate quotes and quality parts with no surface finish faults, to their customers. Without it, Aravis Precision say they would only have half their current turnover.

VISI - The Tool For KA's Expansion 03.06.2015 VISI - The Tool For KA's Expansion
VISI software was at the heart of a mold maker's recent move to new 6,500 square foot premizes. KA Tooling say VISI gave them confidence to invest in additional CNC machines and move to larger premizes to meet the growing demand for their bespoke injection mold tools.

The Art of Producing Power 26.05.2015 The Art of Producing Power
Edgecam Helps Fab-Factory Become a One-Stop Shop for Custom Turbo Assemblies. At Fab Factory, the art of producing horsepower isn’t just about making cars go faster.

Radan Cooks Up Impressive Savings For Glen Dimplex 20.05.2015 Glen Dimplex ietaupījuma recepte
Lokšņu metāla apstrādes programmnodrošinājums RADAN deva firmas Glen Dimplex ražotnei nepieciešamo elastību, lai tā varētu saražot 9 tūkstošus cepamo virsmu, cepeškrāšņu, elektrisko plītu un iebūvēto cepeškrāšņu nedēļā un sasniegt vairāk nekā 120 miljonu mārciņu apriti gadā.

Millions Of Lines Of Edgecam Code Create Rotational Mould Tools 20.04.2015 Millions Of Lines Of Edgecam Code Create Rotational Mould Tools
Edgecam software is playing a pivotal role in assisting a precision engineering company become a growing contributor to the niche market of supplying mould tools to the UK’s rotational moulding industry.

Having invested in a further two new Haas milling machines and a new high specification computer to handle the specific requirements of producing rotational mould tools, Turnell and Odell say they simply could not manufacture them without Edgecam.

Just What Doctor Ordered For Medical Specialist's Complex Parts 20.01.2015 Just What Doctor Ordered For Medical Specialist's Complex Parts
A medical subcontractor uses Edgecam software to focus on its forte of machining difficult, complex parts. "We're taking on ever-more challenging jobs, but they rarely pose a problem to our engineering team. I look at these medical components and wonder how on Earth would we make these without Edgecam?"

VISI Flow Is Vital For Formaplex Mold Tool Integrity 19.01.2015 Formaplex sasniedz mērķus ar VISI Flow
Specializētais programmnodrošinājums plastmasas inžekcijas presformu projektēšanai un ražošanai VISI no Vero Software spēlē būtisko lomu angļu firmas darbā. Katru gadu firma Formaplex sekmīgi izgatavo vairāk nekā 400 presformu. Programmnodrošinājuma iegādes izdevumi atmaksājās jau pirmajā lietošanas mēneša laikā.

Australian Supercars Race Ahead With Edgecam 01.10.2014 Australian Supercars Race Ahead With Edgecam
More than 500 components manufactured using Edgecam are fitted to each of two racing cars competing in the Australian V8 Supercar Championship.

Radbend Goes With the Grain For Crop Processing Machines 30.09.2014 Radbend Goes With the Grain For Crop Processing Machines
A company manufacturing crop processing machines eradicated a production bottleneck by driving four press brakes with Radbend software.

Quality Project For Tecnomatrix With WorkXplore Technomatrix darba kvalitātes uzlabošana ar WorkXplore palīdzību
Technomatrix uzņēmums no Spānijas, kas nodarbojas ar pārbaudes instrumenta projektēšanu un ražošanu automobiļu industrijai, izmantoja WorkXplore sava jaunajā projektā, kura mērķis bija iekšējo komunikāciju un klientu servisa uzlabošana.


Veiksmes stāsti 1 - 68 of 68
First | Prev. | 1 | Next | Last Paged

MŪSU KLIENTI
©2020 Visas tiesības paturētas